Select This Logo For The PyroGuard  Homepage
PyroGuard Extinguishment Assembly

PyroGuard Extinguishment Units

SUPPRESSION UNITS

 All PyroGuard Extinguishment units include a solenoid valve and flow pressure switch for confirmation of water flow at each valve.  The solenoid valves are a diaphragm type, having a self cleaning port which functions every time the valve is activated. This self cleaning action helps ensure that the valves will continue to open and close quickly. Over time, if the diaphragm and seals inside the valve start to wear, Clarke's can supply a complete repair kit.  In most installations the valve repairs can be made without removal from the mounting surface.

 Suppression units are pre-plumbed with the solenoid valve, 'Y' strainer, and nozzles as one assembly, thereby reducing installation costs.

 The pre-plumbed unit has sufficient unions located to facilitate easy maintenance.

 Solenoid valve has a self-cleaning pilot hole to protect against contaminated water affecting the closing time of the valve.

 Spring loaded contamination free nozzles, available in brass or stainless steel.

 Stainless steel flush mounting adapters protect nozzles from wear.

 Pressure switch with filter on the discharge side of the valve allows for confirmation of water flow at each solenoid valve.

 Solenoid valve repair kits available, allowing for component repair without removal from suppression assembly.

TECHNICAL DATA

Voltage: Extinguishment circuit 24Vdc.

Extinguishment valves 12Vdc & 24Vdc.

Valves/unit: 1-4.

Pressure switch: Activates at 20 PSI on the discharge side of the valve.

Construction:  Soldered copper pipe with unions to facilitate easy maintenance. 'Y' strainer with ball valve for easy flushing.

No. of Nozzles

No. of Valves

Size of Valve

Pipe Diameter

Response Time

SU-1

1

1"

0" thru 20" Dia.

300 ms

SU-2

1

1"

21" thru 30" Dia

300 ms

*SU-1/SU-2

2

1"

31" thru 38" Dia

300 ms

*SU-2/SU-2

2

1"

39" thru 44" Dia

300 ms

*SU-2/SU-3

2

1-1/2"

45" thru 49" Dia

400 ms

*SU-3/SU-3

2

1-1/2"

50" thru 54" Dia

400 ms

*SU-3/SU-3/SU-3

3

1-1/3"

55" thru 64" Dia

400 ms

* Pipe over 30" diameter require nozzles on both sides of the pipe.

 [Clarke's Sheet Metal] [Clarke's Allied] [Fire Management] [Clarke's South America] [China] [Canada]

 [Consoles] [Extinguishment] [Sensors] [Abort Gates] [Booster Pumps] [Other Detectors] [Test Lights]

 [Interface Device] [Software] [PyroComm] [OmniServer] [Engineering] [Get A Quote] [TroubleShooting]

[Contact Us] [Trade Shows] [About PyroGuard] [Spare Parts] [Related Links] [Whats New] [Home]

 

Made In America

COPYRIGHT 2000, Clarke's Sheet Metal, Inc, ALL RIGHTS RESERVED.